Mercedes-Benz ML 320 Operator's Manual page 44

Instruments
Operation
and controls
Seats
Memory storing and recalling
(optional on model ML 320 and ML 430)
5 Memory button
6 Position buttons
Instrument
Driving
cluster display
Practical hints Car care
41
Storing
Three sets of seat positions may be programmed into
memory. After the seat is positioned, push memory
button (5), release, and within 3 seconds push position
button "1". A second and third set of positions for the
same seat can be programmed into memory by pushing
first memory button (5) and then position button "2",
respectively "3".
Recalling
To recall a seat position, push and hold one of the
position buttons "1", "2" or "3" until seat movement has
stopped. The seat movement stops when the respective
position button is released.
Caution!
Do not operate the power seats using the memory
button if the seat backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
First move the backrest to an upright position.
Technical
Index
data