Changing Wheels - Mercedes-Benz ML 320 Operator's Manual

Changing wheels

Warning!
The jack is designed exclusively for jacking up the
vehicle at the jack take-up brackets built into either
side of the vehicle. To help avoid personal injury,
use the jack only to lift the vehicle during a wheel
change. Never get beneath the vehicle while it is
supported by the jack. Keep hands and feet away
from the area under the lifted vehicle. Always
firmly set parking brake and block wheels before
raising vehicle with jack.
Do not disengage parking brake while the vehicle is
raised. Be certain that the jack is always vertical
when in use, especially on hills. Always try to use
the jack on level surface. Be sure that the jack arm
end is fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient capacity
jackstands before working under the vehicle.
Tires, Wheels
Instruments
Operation
and controls
199
Instrument
Driving
cluster display
Position vehicle jack only at the jack take-up bracket
when raising the vehicle.
Practical hints Car care
Technical
Index
data