If the appliance is not switched off, a program starts. Its
execution can only be stopped by aborting the program.
5.
Operating status can be achieved by switching the appliance off /
on.
209_58300000178575_ARA_EN_C.doc – 30.06.2015
6.18.2 Flashing of power module
Turn function selector one position to the right
4.
No information in the display
5.
Flash the power module
6.
Switch the appliance off and wait 3 sec.
7.
Switch the appliance on (uPD appears on display), after 3 sg
aprox the display shows 0:00).
Page 60 de 70