6.13.2 Assemble with torque wrench: nut 24 or nut 18
►
Tighten the pulley hand-tight with the collar nut.
►
Fix the pulley in position using auxiliary tool (C).
►
Tighten to 75 Nm using the torque wrench for collar nut of 24
or 90 Nm for elastic nut of 18
►
Remove the auxiliary tool, hoist the belt and make sure that it
is seated correctly.
►
Fit the rear panel.
209_58300000178575_ARA_EN_C.doc – 30.06.2015
A
Torque wrench 341222
B
Size 24 socket wrench 24 341223
Size 18 socket wrench 18
15000105
C
Auxiliary tool 341238
Page 50 de 70