Chapter 3
Using the
Desktop
Projector
Control Panel
Keys
Figure 3-1
The DP5100 control
panel
Chapter 3 • Using the Desktop Projector
This chapter describes each of the keys on the control panel and
the remote control. It also explains the various projector settings
and how to change them.
The figure in the margin shows the control panel for the
DP5100.
STANDBY/ON Key
The STANDBY/ON key toggles the projection lamp on and off.
• STANDBY - Everything is on except the lamp and the fan.
• ON - The projector is in the projection mode.
INPUT Key
The INPUT key selects the input source. Each time this button is
pressed, the input source is changed in sequence as shown below:
VIDEO1
ZOOM Key
The ZOOM key adjusts picture size.
• W: Picture becomes wider.
• T: Picture becomes telescopic (smaller).
VIDEO2
RGB1
User's Guide • 3–1
RGB2