Displaying A Video Image - Proxima DP1200x User Manual

Displaying a video image

Remove the lens cap.
Press the Power button on the top of the projector.
The LED flashes green. When the lamp comes on, the startup screen is dis-
played and the LED is steady green. It can take a minute for the image to
achieve full brightness.
? No startup screen? Get help on page 15.
Plug in and turn on the video device.
? No video image? Try pressing the Source or Auto Image
button on the keypad. Get help on page 15.
Adjust the height of the projector by pressing the release button to extend
the elevator foot.
Position the projector the desired distance from the screen at a 90 degree
angle to the screen. See page 38 for a table listing screen sizes and distances
to the screen.
remove lens cap
press Power
turn on video device
source
adjust height
adjust distance
12
release button