Viewing Images On A Tv Screen - Sony Mavica MVC-CD1000 Operating Instructions Manual

To skip to the next/previous
image during the slide show
Select \b/B\ at the lower-left on the
screen.
Notes
• The interval setting time may vary
depending on the image size.
• When [REPEAT] is set to [ON], the slide
show does not end until all the images
played back, even if it takes more than 20
minutes.
Viewing images on a
TV screen
You can view images recorded onto a
disc on a TV.
Set the TV/
VIDEO switch
to "VIDEO."
to A/V OUT (MONO)
jack
1
Connect the A/V connecting
cable to the A/V OUT (MONO)
jack of your camera and to
the audio/video input jacks of
the TV.
If your TV has stereo type input
jacks, connect the audio plug of the
A/V connecting cable to the Lch
jack.
2
Turn on the TV and start
playback on your camera.
The playback image appears on the
TV screen.
Note
You cannot use a TV that has an antenna
(aerial) connector only.
A/V
connecting
cable
59