Using The Program Ae Function - Sony Mavica MVC-CD1000 Operating Instructions Manual

Notes
• Focal point information may not
completely show the correct distance. Use
the information as a guide.
• Focal point information does not show the
correct distance when attaching the
conversion lens.
• If you shoot a subject within 31 1/2 inches
(0.8 m) while the zoom lever is set to T
side, you cannot get a clear focus. In such
cases, the focal point information flashes.
Move the zoom lever to the W side until
the indicator stops flashing.
• You cannot adjust the focus manually if
you have selected the Panfocus mode in
the PROGRAM AE function.
Using the PROGRAM
AE function
PROGRAM AE +/–
1
Set the PLAY/STILL/MOVIE
selector to MOVIE or STILL.
2
Press PROGRAM AE
repeatedly to select the
desired PROGRAM AE mode.
Aperture priority mode
For making the subject stand out
against an unclear background or
providing a larger in-focus range.
Press PROGRAM AE +/–
repeatedly to select an aperture
value in 9 steps from F2.8 to F11.
Shutter speed priority
mode
For recording a sharp picture of a
fast-moving subject or recording
the flow of motion of a moving
subject.
Press PROGRAM AE +/–
repeatedly to select a shutter speed
in 17 steps from 8'' to 1/500 when
recording a still image, or in 11
steps from 1/8 to 1/500 when
recording a moving image.
Twilight mode
Suppresses the blurring of colors
of a bright subject in a dark place
so that you can record the subject
without losing the dark atmosphere
of the surroundings.
1
2
51