4. Drive Section
4-1 SPF-9
1. Electricity is charged by turning on power switch. Motor will rotate with hand feed mode.
(In automatic mode, motor will rotate as soon as collator starts.)
2. Motor drives reduction belt and reduction pulley. At this point, speed of reduction pulley will
be 1/3 of motor speed.
3. Reduction pulley drives fold rollers and press rollers. When clutch is on, transport belt will be
rotated by clutch pulley.
4. When clutch is turned off, transport belt will stop.
Press Roller
Timing Belt
Fold Roller
Clutch Pulley
Operation Side View
Transport Roller (9 pcs)
Transport Belt
Reduction Belt
Motor
Reduction Pulley
7