Sheet Flow - Horizon Fitness SPF-9 Service Manual

3. Sheet Flow

3-1 SPF-9
There are 2 ways in sheet flow.
I. When "stapling & folding" or "folding" mode is selected with operation mode select
button
1. Sheets enter and hit staple and fold stopper.
2. Sheets are jogged by jog plate and jog guide (F).
3. Sheets are stapled in staple & fold mode.
4. Transport roller (F) unit and transport roller (R) unit lower at the same time staple and fold
stopper rises, and transport belt transports sheets.
5. Sheets pass under gate and stop by hitting stopper in fold section.
6. Fold knife pushes fold part of sheets and fold roller nips sheets and then press rollers press
sheets and sheets are ejected.
II. When "side stapling" or "corner stapling" mode is selected with operation mode select
button
1. Sheets enter and hit side staple stopper.
2. Sheets are jogged by jog plate and jog guide (F).
3. Sheets are stapled.
4. Transport roller (F) unit and transport roller (R) unit lower at the same time staple and fold
stopper lowers, and transport belt transports sheets.
5. Sheets pass above gate and are ejected.
4