DAHENG-IMAGE MER-031-860U3C User Manual page 76

Mercury U3V Cameras User's Manual
When the pixel format is set to Mono8, the brightness value of each pixel is 8bits. The format in the memory
is as follows:
Y00
Y10
Among them Y00, Y01, Y02 ... are the gray value of each pixel that starts from the first row of the image.
Then the gray value of the second row pixels of the images is Y10, Y11, and Y12...

Mono10/12
When the pixel format is set to mono10/12, each pixel value in the output image of the camera is 16bits,
and the effective data of the mono10/12 format is 10/12bits, and the high 6/4 bit is complemented with 0.
Note that the brightness value of each pixel contains two bytes, arranged in little-endian mode. The format
is as follows:
Y00
Y10
Among them Y00, Y01, Y02...are the gray value of each pixel that start with the first line of the image. The
first byte of each pixel is low 8bits of brightness, and the second byte of each pixel is high 8bits of
brightness.

BayerGR8
Column
0 0 1
Raw
0
1
2
3
4
5
6
7
When the pixel format is set to BayerGR8, the value of each pixel in the output image of the camera is
8bits. According to the location difference, the three components of red, green and blue are respectively
represented. The format in the memory is as follows:
G00
B10
Where G00 is the first pixel value of the first row (for the green component), R01 represents the second
pixel value (for the red component), and so on, so that the first row pixel values are arranged. B10 is the
Y01 Y02
Y11 Y12
......
Y01 Y02
Y11 Y12
......
2 3 4 5
R01 G02
G11 B12
......
Y03 Y04
Y13 Y14
Y03 Y04
Y13 Y14
6 7 8 9
R03 G04
G13 B14
......
......
......
......
10 11
......
......
69