10. Value Of Coin - LG GDP1329CGS Owner's Manual

10. Value of coin 1

Entering set up
mode.
You will see LqC1
NOTE
• Price setting varies by country.
• Set your country from
• After EEPT, reset your country. (Default country is ELC)
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display previous coin 1 value.
Press Med Temp.(+) or Low Temp.(-) button to select value of
coin 1 (The value can be set from 0.05 to 9.95 in 0.05 increments.)
Press the Start button.
The machine sets up the value of coin 1, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "High Temp. " twice.
mode. (Refer How to enter the
Button
)
PROGRAMMING MODE
Display
31