Vend Type Setup - Card Type Or Coin Type Setup - LG GDP1329CGS Owner's Manual

3-2. Vend type setup - card type or coin type setup

Entering set up
mode.
You will see LqC1
NOTE
• SEdE (sensor dry apply or not) is not available in dryer.
• PrSH (Pre-wash apply or not) is not available in dryer.
• After setting the Value to VEND, vend type is changed directly without power on/off.
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display .
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press Med Temp. or Low Temp. button and then select
or .
Coin type
Card type
Press the Start button.
The machine sets up the vend type, then go to the idle mode
automatically.
Button
PROGRAMMING MODE
Display
One or the other will
display.
21