Anybus CompactCom 40 EtherCAT Network Manual page 115

JSON
ifcounters.json
GET network/ifcounters.json?port=<port>. The argument <port> is either 1 or 2.
Name
inoctets
inucast
innucast
indiscards
inerrors
inunknown
outoctets
outucast
outnucast
outdiscards
outerrors
mediacounters.json
GET network/mediacounters.json?port=<port>. The argument <port> is either 1 or 2.
Name
align
fcs
singlecoll
multicoll
latecoll
excesscoll
sqetest
deferredtrans
macrecerr
mactranserr
cserr
toolong
tooshort
Anybus ® CompactCom ™ 40 EtherCAT
Data Type
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Data Type
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
® Network Guide
Note
IN: bytes
IN: unicast packets
IN: broadcast and multicast packets
IN: discarded packets
IN: errors
IN: unsupported protocol type
OUT: bytes
OUT: unicast packets
OUT: broadcast and multicast packets
OUT: discarded packets
OUT: errors
Note
Frames received that are not an integral number of octets
in length
Frames received that do not pass the FCS check
Successfully transmitted frames which experienced ex-
actly one collision
Successfully transmitted frames which experienced more
than one collision
Number of collisions detected later than 512 bit times into
the transmission of a packet
Frames for which transmissions fail due to excessive
collisions
Number of times SQE test error is generated
Frames for which the first transmission attempt is delayed
because the medium is busy
Frames for which reception fails due to an internal MAC
sublayer receive error
Frames for which transmission fails due to an internal
MAC sublayer transmit error
Times that the carrier sense was lost or never asserted
when attempting to transmit a frame
Frames received that exceed the maximum permitted
frame size
Frames received that are shorter than the lowest permit-
ted frame size
113 (136)
SCM-1202-034 1.1