Pre-collision alert braking (vehicle with driver monitor system):
●
• The pre-collision braking off switch is not pressed.
• The system determines that the driver is not facing forward.
• Vehicle speed is greater than about 9 mph (15 km/h).
• The speed at which your vehicle is approaching the obstacle or the vehicle
running ahead of you is greater than about 24 mph (40 km/h).
Conditions that may trigger the system even if there is no possibility of a collision
■
When there is an object by the roadside at the entrance to a curve
●
When passing an oncoming vehicle on a curve
●
When driving over a narrow iron bridge
●
When there is a metal object on the road surface
●
When driving on an uneven road surface
●
When passing an oncoming vehicle on a left-turn
●
When your vehicle rapidly closes on the vehicle in front
●
When a grade separation/interchange, sign, billboard, or other structure
●
appears to be directly in the vehicle' s line of travel
When climbing a steep hill causes an overhead billboard or other metallic struc-
●
ture to appear directly in the vehicle' s line of travel
When there are excessive changes in the vehicle height (when it tilts forwards
●
or backwards)
When there is an abnormality in the radar sensor
●
When the system is activated in the situations described above, there is also a possi-
bility that the seat belts will retract quickly and the brakes will be applied with a force
greater than normal. When the seat belt is locked in the restricted position, stop the
vehicle in a safe place, release the seat belt and refasten it.
GX460_U.S.A. (OM60G24U)
2-4. Using other driving systems
2
345