Table of Contents
Advertisement
3.1 Installation
3.1.1 Door stations
Model No. 6
A) Surface mount
a. Take off the coat from the door panel with
the enclosed driver ( ).
b. Install the expansion plugs in the wall beside
the cable( ).
④
c. Put the big seal behind the bracket and fix
both on the wall with the screws( ).
d. Put the small seal behind the door panel and
then fix both on bracket after connect the
cable( )
② .
e. Cover the door panel with the coat and fix them
with the screws and driver( ).
B) Flush mount
a. Produce a groove (115x70x41mm) on a proper
position in the wall( ).
b. Put the box in the groove and fix it in the wall
with screws and cement( ).
c. Take off the coat from the door panel with the
enclosed driver( ).
①
d. Put the small seal behind the door panel and
fix them on the box with screws after connect
the cable( ).
②
e. Cover the panel with the coat and fix it( ).
Please mind the soft plastic protector is put on the call switch. It is easy to drop.
Model No.9
a. Release the panel from the bracket with the enclosed
screw driver(
).
②③
b. Choose a proper position and fix the big seal and bracket
on the wall with 2 screws (
c. Put the panel on the bracket after connect the cable( )
d. Fix the panel from the bottom with the enclosed driver
and screw(
②③
).
Model No.18 (Flush mount)
a. Produce a groove(86.4x154.4x55mm)
on a proper position of the wall( ).
b. Take off the door panel from the box
with the enclosed screw driver(
c. Fix the box in the groove with screws
and expansion plugs or cement( ).
d. Fix the door panel in the box with the
screws( ).
④
Part 3. Installation and connection
①
③
①
④
③
①
).
①②
①
).
② ③
①
Small seal
Door panel
Coat
Soft plastic protector
Small seal
Door panel
Coat
Soft plastic protector
Small seal
③ .
Panel
C A
L L
M IC
②
Door panel
z
Big seal
expansion plugs
Rain shield(bracket)
expansion plugs
Box
Hook
Big seal
expansion plugs
Bracket
①
Wall
③
Box
Advertisement
Table of Contents
