Table of Contents
Advertisement
B) Diagrams for SIGNAL electronic locks
B1. Indoor pho ne (exampl e: Model V-25)
JP402-IN
JP403-OUT
AF- P
P
P
A
A
AF
V
V
NC
G
G
Lock1
Lock2
COM
NC
NO
COM
NC
12VDC
①P ease choose one of the abovementioned diagrams according to the electronic locks.
l
②
Instant output (Diagram A1 & A2): 12VDC, 500mA.
③Please put the jumper of JPT on PT position once you wire as diagram A1 or A2. But please put it on NC position once you wire
as diagram B1 or B2.
④In diagram B1 and B2 COM terminal has to be connected. NC means close circuit. NO means open circuit. Please choose a right
terminal according to the electronic locks.
⑤There are no terminals for electronic locks in the indoor phones of Model F-7, N60, V-16, V-18, V-26. And there is no terminal for
power locks on the door station Model No.9.
⑥The electronic locks can keep releasing in 0.5 second only in diagram A1 and A2, but in 5 seconds in diagram B1 and B2.
⑦ It is available to release the electronic locks by directly pushing
⑧SIGNAL locks and POWER locks can be connected to different door stations or indoor phones. There is no interfere.
⑨A SIGNAL lock and a POWER lock can be connected to a same door station or a same indoor phone, but the jumper of JPT has
to be put on PT position, so that the instant strong power current will not destroy the devices.
⑩Please mind if the wires of electronic locks are nonpolarity.
3.2.5 Extra unlock button (Model N60 &N75B only)
There are extra unlock buttons with relays on Model N60 & N75B indoor phones. They can be applicable for gates, garages, lights,
etc.
e-lock
+18V INPUT
JPT
PT
NC
Gates, garages, lights, or etc.
B2. Doo r station (exampl e: Model No. 15)
12VDC
button if the locks are connected to the indoor phones.
...
or
12
Lock1
COM
COM
NC
NO
NO
Lock2
PT
NC
18V
AF
VIDEO
GND
S1
S2
JPT
Advertisement
Table of Contents
