Rating And Specifications; General Information - Mitsubishi Electric CBV2-A01D1 Instruction Manual

2

Rating and specifications

2.1 General information

Type name
Relay without RS232C I/F
Style
Relay with RS232C I/F
Protection
Element
Measurement
Frequency
Rating
Auxiliary
power supply
*21
Display
Item No., Item data
Communication
Self-diagnosis
Configurations
Output
contacts
Capacity
Voltage circuit
Zero-phase voltage circuit
Burden
Auxiliary power supply circuit
Mass
Case/cover
*21 When an uninterruptible AC power source is not provided in your system for the auxiliary supply voltage, use the
type CPS1 AC/DC converter or commercially available uninterruptible power supply (UPS).
Power supply product of 24VDC or 48VDC is also available if ordered (non-standard product).
In addition, the power supply duration of the type CPS1 AC/DC converter is confirmed about 2 seconds in
combination with one MELPRO-D series relay. Therefore, in the case that the required power supply duration after
power source loss exceeds 2 seconds, please use a suitable commercial uninterruptible power supply.
When the power supply back up for the control power supply of a circuit breaker is required, it is necessary to
prepare the backup power supply different from the type CPS1 AC/DC converter.
Voltage
Voltage Common use for 100 ~ 220VDC / 100 ~ 220VAC
DC : 85 ~ 242 V (Range of 80 ~ 286VDC is allowable temporarily.)
Operative range
AC : 85 ~ 242 V (Range of 80 ~ 253VAC is allowable temporarily.)
Indicate the result of
RUN
and off for abnormal.
Unit Indicate the unit symbol for measurements.
Display measurement, status, setting and option data selected with an item
number.
With a communication card installed: the lamp is lit for normal conditions,
blinking during communication and off for abnormal.
With a communication card not installed: the lamp is off.
Monitor the electronic circuit and internal power supply to output signal to
the RUN LED and
For trip 2 make contacts: X
For signaling 4 make contacts: X
For self-diagnosis
1 break contact: Y (open for normal result of self-diagnosis with power on)
output
Make
For trip
Break
Carry
Make and Break
For signaling and
self-diagnosis
Max. current
output
Max. voltage
1 VA or less (with rated current)
0.15 VA or less (with rated current)
For 100VDC: approx. 5 W (approx. 7W including communication card)
For 100VAC : approx. 7 VA (approx. 9VA including communication card)
For 220VDC: approx. 6 W (approx. 8W including communication card)
For 220VAC : approx. 12 VA(approx. 14VA including communication card)
Net weight of relay unit :
Including case
Size
Color
CBV2-A01D1
354PMB
541PMB
Undervoltage element ×31
Overvoltage element × 3
Voltage
50 Hz
57 ~ 120 V
self-diagnosis
self-diagnosis output (ALARM)
and X (programmable output)
4 5
to X (programmable output)
0 3
110VDC, 15A, 0.5 s (L/R = 0 s)
220VDC, 10A, 0.5 s (L/R = 0 s)
110VDC, 0.3A (L/R<40 ms)
220VDC, 0.15A (L/R<40 ms)
1.5 A, continuously
500 VA (cosφ= 0.4),
60W (L/R = 0.007 s)
5 A
380VAC, 125VDC
approx. 2.3 kg
: approx. 3.0 kg
: D1 type
: N1.5
6
355PMB
542PMB
60 Hz
. The lamp is lit for normal conditions
.
PCKN-OIL738