Springfree O92 Assembly & Disassembly Instructions page 14

9
1
WARNING - Treat any loaded rod with caution until you are sure it is properly installed or
uninstalled. Keep your face well away from any loaded rod.
Locate the yellow tags along the top edge of the net. Select one of the horizontal net rods and slide it into
the pocket at the yellow tag. It is normal for the rod to be a tight fit. Once fully inserted, tuck the end of the
rod into the pocket and check that the rod is centered within the pocket.
Repeat on the other sides of the trampoline.
Assemble the black net rods as shown.
Locate the pockets at the top edge of the net and install all of the black net rods.
Take care to fully push the ball of the black net rod into the pocket as shown. There is an internal catch at
the top of the pocket and the ball must be pushed past this internal catch or else it will come out. You will
feel some resistance as the ball is pushed through.
NOTE - If you purchased a FlexrHoop
now. This will save you a couple of steps later.
2
with your trampoline, you could stop and install it right
TM