Multiroom - Revo SUPERCD Owner's Manual

MULTIROOM

UNDOK MULTIROOM SETUP
If you are running more than one SUPERCD (or other UNDOK-enabled
device) on the same network you can create a multiroom system without
using the UNDOK app.
To begin, press the button, then select 'System Settings', followed by
'Multi-room' to enter the multiroom setup menu.
Select 'Create New Group' to create and name a new multiroom group
(e.g. Ground Floor). SUPERCD will then prompt you to add other devices
to this group.
MULTIROOM MENU OPTIONS
View the details of your multiroom group - if the device is a server or client
and the group's name.
As the server (master) you can add more devices to your multiroom
group.
NB This function can only be performed by the server.
List current clients (slaves) in the group, and remove them if required.
If the device you're using is a client (slave), you can opt to leave the
mulitroom group.
If the device you're using is the server (master), you can dissolve the
multrioom group entirely.
32
Multi-room
View details >
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details >
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details >
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details >
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details >
Create new group
Add to group >
List current clients >
Leave group
Multi-room
Create new group
Add to group >
List current clients >
Leave group
Dissolve group