Changing The Cell - MCi SynAIRgPure 16K Owner's Manual

Changing the Cell

1 . Unplug the unit's power cord from the outlet .
2 . Remove the Wing Nuts and unit from the duct .
3 . Remove the two (2) screws holding the cell on
the rear of the Ballast Housing .
4 . Replace either the UV Lamp or entire Cell with a
new Cell and fasten the two (2) screws into place .
5 . Replace the Unit and the Wing Nuts .
6 . Plug the unit's power cord into the outlet .
DBI Cell Options
Should you need a stronger output from your MCI SynAIRgPure
have an available option for 1 or 2 DBI (Dielectric Barrier Ionization) Cells
with a mounting bracket, which will increase your effective output by 3x the
normal power .
To learn more about or to purchase the DBI Cells, contact your BLS
Distributor/Contractor or visit us online @ www .BestLivingSystems .com .
(See Specifications Pg. 3 for Coverage Information)
16K we
TM
9