Welcome Thank you for your purchase of the MCI SynAIRgPure Air Purification Enhancement System . This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enchancement to current air purification technology .
Specifications The standard MCI SynAIRgPure 16K uses a 9” MCI Cell . This cell is rated for 16,000 Cubic Feet of breathing space . (1-3 Tons HVAC System) Up to two (2) additional DBI Cells can be added to increase the effective area up to 40,000 Cubic Feet tons of breathing space .
MCI and DBI Cells on an annual basis . The Cells are working when the indicator lights are on (Sight Glass for MCI Cell and LED for DBI Cell) . For optimal performance, annual maintenance is encouraged .
MCI SynAIRgPure the air handler in the HVAC system in Supply Plenum the supply plenum . * *Another MCI SynAIRgPure 16K is recommended in the Return Plenum for additional protection and to keep the internal parts clean. An approximate opening of 3” W x 5” H will need to be cut into the existing duct work to install the unit properly .
Installation Process Locate a suitable area of duct for installation . 2 . Cut away any insulation to expose the duct . Draw a rectangle measuring 3” W x 5” H on the duct face . Use the Drill to make 4 holes in the corners of the marked rectangle .
Installation Process (Cont.) 6 . Place the unit through the hole and shift it up to cover any exposed hole . Mark the screw locations in the corners of the cover and remove the unit . 8 . Drill the holes out and place the four (4) Threaded Bolts through the holes, from the inside, protruding out .
. If the indicator does not glow and the unit has power, the Cell needs replacing . NOTE: For optimal performance, we recommend the replacement of the MCI Cell every 3 years, even if the UV Lamp appears to be operating normally . Some Mechanical Contractors, depending on contamination levels, may recommend annual replacements of lamps in conjunction with an annual servicing of your system .
5 . Replace the Unit and the Wing Nuts . 6 . Plug the unit’s power cord into the outlet . DBI Cell Options Should you need a stronger output from your MCI SynAIRgPure 16K we have an available option for 1 or 2 DBI (Dielectric Barrier Ionization) Cells with a mounting bracket, which will increase your effective output by 3x the normal power .
Ballast Housing, beneath the Molex connector . Place the Hook-end of the DBI Cell Mounting Bracket over the back of the MCI Cell, with the screw hole overlapping the open screw hole of the Ballast Housing .
Your BLS HVAC Housing (Product) is warranted to be free from all defects in material and workmanship in normal household use for a period of two (2) years from date of purchase . * Your BLS HVAC MCI Cell, including the bulb, is warranted to be free from all defects in material and workmanship in normal household use for a period of two (2) years from date of purchase .