ProForm PFTL59290 User Manual page 11

Proform user's manual treadmill pftl59290
Table of Contents

Advertisement

Each program is divided into several individual
"segments." The speed and/or incline of the tread-
mill will automatically change at the beginning of
each segment.
Throughout the pro-
gram, the TIME/SEG-
MENT display will
show the time remain-
ing in the program as
well as the time re-
maining in the current "segment" (see TIME/SEG-
MENT display on page 9.) When only three sec-
onds remain in the current segment, a series of
tones will be heard and the speed and/or incline of
the treadmill will automatically change. Make sure
to listen for the tones and be ready for speed
and/or incline changes.
The program will continue in this way until no time
remains in the program. The walking belt will then
slow to a stop.
If the program is too difficult or too easy, the speed
and incline of the treadmill can be adjusted at any
time with the SPEED and INCLINE buttons. How-
ever, when the next segment of the program
begins, the speed and incline will automatically
change to the next settings of the program.
To stop the program for a moment, press the STOP
button. The TIME/SEGMENT display will begin to
flash. To restart the program, press the START but-
ton. To stop the program and reset the displays,
hold down the STOP button for two seconds.
Follow your progress with the LED track and
4
the four displays.
See step 5 on page 9.
Measure your heart rate, if desired.
5
See step 6 on page 10.
When the program is completed, remove the
6
key.
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. Note:
If the displays and various indicators on the
console remain lit when the key is removed,
the console is in the "demo" mode. Refer to
the information at the right and turn off the
demo mode.
When you are finished using the treadmill, unplug
the power cord and move the on/off switch to the
off position.
THE INFORMATION MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour.
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The TIME/SEGMENT display
will show the total number of
hours the treadmill has been
used.
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.
An "E," for english miles, or
an "M," for metric kilometers,
will appear in the SPEED/
INCLINE display. Press the
L L
SPEED
button to change
the unit of measurement.
IMPORTANT: The CALO-
RIES/PULSE display
should be blank. If a "d" ap-
pears in the display, the con-
sole is in the "demo" mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When
the console is in the demo
mode, the power cord can be
plugged in, the key can be re-
moved from the console, and the displays and indica-
tors on the console will automatically light in a preset
sequence, although the buttons on the console will not
operate. If a "d" appears in the CALORIES/PULSE
display when the information mode is selected,
M M
press the SPEED
button so the CALORIES/PULSE
display is blank.
To exit the information mode, remove the key from the
console.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp5 ekg grip pulse

Table of Contents