technical info COntrols § Reverberation On/Off Switch (Verb) § Amount of reverberation (Reverb) § Re-injection (Dwell) § Tremolo On/Off Switch (Spin) § Tempo (Speed) § General tremolo Depth § For each time Depth by pot and L, C, R position by switch §...
A mode selector lets you choose the form of attack tremolo. It is of course possible to combine the two effects. Unlike all Labo ★ K Effects pedals, the Spinyverb is not True By Pass. It is possible to use it as a splitter to feed 2 amplifiers.
controls I – THE POTENTIOMETERS 1. Time 1-2-3-4 Each knob adjusts the depth of the tremolo effect for the corresponding time. 2. Speed Allows you to control the speed of the tremolo. 3. Depth This setting affects the general depth of the tremolo. 4.
Power supply Labo ★ K Effects pedals are powered by 9V DC battery or external power adapter using the « Boss ™ » standard (negative (-) in the center, positive (+) outside. The pedal can be supplied in several ways: §...
advices To keep the integrity of the sound, use good quality mono Jack cords exclusively. Labo ★ K Effects – www.labo-k-effects.com – contact@labo-k-effects.com...
troubleshooting STAGE 1 No sound goes out of the device: § Verify that all your equipment works without the pedal. § Insert the pedal into the chain. § If no sound output when the device is switched on, skip to step 4 STAGE 2 §...
Need help?
Do you have a question about the Spinyverb and is the answer not in the manual?
Questions and answers