JVC CA-MXJD5 Instructions Manual page 11

To connect a center speaker and surround speakers
From center
speaker
From left surround
speaker
From right surround
speaker
• Connect the center speaker to the CENTER jack.
• Connect the left surround speaker to the LEFT jack.
• Connect the right surround speaker to the RIGHT jack.
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the unit.
To connect digital audio
Before connecting optical digital cord, remove the
protective cap from the OPTICAL DIGITAL OUTPUT
terminal.
To connect other equipment
By using a stereo mini plug cord (not supplied), you can connect
equipment with analog audio output jacks such as an MD player,
a TV, etc.
Stereo mini plug cord (not supplied)
AUX
(front panel)
If the audio output on the other equipment is not stereo
mini plug type,
use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
IMPORTANT
Always set volume to MIN when connecting or
disconnecting the other equipment.
CENTER
To connect the AV COMPU LINK cords
The AV COMPU LINK control system allows you to use
JVC's TV with simple operations; by starting playing back
a disc, the TV automatically turns on and changes the input
mode to the appropriate position so that you can view the
playback picture.
To use AV COMPU LINK, you need to connect the unit and
the TV by using a cord with monaural mini-plugs (not
supplied) in addition to the connection with a video cord
(see page 4).
To set the video output selector
You can select the video output to match it to the color
system of your TV.
O P T
I C A
D I G
L
I T A L
O U T
P U T
Adjusting the Voltage Selector
Use a screwdriver to rotate the voltage selector so that the
voltage marker is pointing at the same voltage as where you
are plugging in the unit. (See also the back cover page.)
Portable audio
device,
Game, etc.
DO NOT plug in any equipment until all
connections are complete.
NTSC: For an NTSC TV or
PAL: For a PAL TV or
Voltage marker
DO NOT plug in before setting the voltage
selector on the rear of the unit and all
connection procedures are complete.
Multi-color system
TV.
Multi-color system
TV.
7