Advertisement
3. Run AutoTest
Tap the AutoTest button
the HOME screen), or press the AutoTest key (located on the front
.
panel)
Link on active ports (wired and/or Wi-Fi ports)
Obtain IP addresses
Run Network Infrastructure Tests
Run User Tests - When multiple User Tests are present, they run
starting with the lower-left test on the bottom test tier and finishing
with the upper-right test on the top test tier.
4. View the Test Results
To see a test's detailed results,
tap its icon on the HOME screen.
The test's SETUP or RESULTS tab
is displayed. Tap a tab to open it
The test's status (pass
) is indicated at the lower left
corner of the RESULTS tab.
When you tap the AutoTest key
or the AutoTest button again, all
test results are cleared and the
tests run again.
5. Create a Report
To create a comprehensive
network performance report:
1 Tap the OneTouch AT G2 button
shortcut bar at the top of the HOME screen.
2 Tap the Save Report button.
3 Change the file name if desired, then tap the DONE button.
You can also configure your OneTouch to automatically upload test
results to the Link-Live Cloud Service. See
OneTouch AT to the Link-Live Cloud Service"
To manage reports, tap the TOOLS button, then scroll down to the
File Tools section. Select the Reports button to open the report file
manager.
6. Add a User Test
Touch and hold white space on a test tier to add a new User Test.
Run AutoTest again to view the results.
7. Save a Profile
To save a Profile:
1 Configure the analyzer as desired (add User Tests, change
settings, etc.).
The OneTouch G2 analyzer will:
or fail
(located at the lower-right corner of
.
"How to Claim your
, which is in the
on the next page.
Advertisement
