Advertisement
button
DHCP Server
Tap the
an IP address via DHCP on both the wired and
Wi-Fi connections.
DNS Server
Tap the
resolving the specified URL.
Wired Analysis
Tap the
broadcast domain. See "Wired Analysis" in this guide.
The Nearest Switch and Wi-Fi Network Connect tests are below the
network infrastructure tests.
Nearest Switch
Tap the
VLAN of the wired connection. If SNMP is enabled, additional
information is available.
Access Point
Tap the
The target SSID and its security credentials must be included in the
loaded profile.
The media tests are next as you move down the screen.
Cable/Link/PoE
·
cable test, if the analyzer cannot link
·
link speed, duplex, receive pair, level, and polarity
·
PoE class and type, unloaded voltage measurement, and
TruePower™ loaded voltage and power measurements
Wi-Fi Analysis
The
network. See "Wi-Fi Analysis" in this guide.
The following icons are at the bottom of the screen.
TOOLS
Wired IP Address
The
Instrument icon; the Wi-Fi IP address is to the right.
OneTouch AT G2 instrument icon
Tap the
screen for wired and Wi-Fi network connection details, errors,
statistics, and more.
AutoTest
The
user tests.
How to Run an AutoTest
AutoTest provides a comprehensive test of network infrastructure
tests, along with user-defined tests.
The OneTouch G2 analyzer does not initiate any link, user test, or
infrastructure test activity until you run AutoTest.
1. Power the Analyzer
Connect the AC adapter to charge the battery if necessary.
2. Connect to the Network
Connect the network under test to Port A (Item
can use the RJ-45 Ethernet jack for copper cable, or an SFP inserted
in the SFP receptacle for fiber cable.
Analysis
, then tap
to view the process and results of acquiring
button to view the performance of DNS servers
icon to see wired devices discovered in the
to show the switch name, model, port and
icon for
provides
icon to see discovered devices in your wireless
are discussed later in this document.
is shown to the left of the OneTouch AT G2
button initiates link and runs infrastructure tests and
.
Wi-Fi Network Connect
test results.
at the bottom of the
in Figure 1). You
Advertisement
