JVC LT32DP8BG User Manual page 13

C
Set the timer
A message will be displayed if there is problem with the reservation.
When you reserved the programme using EPG, EPG will be displayed.
When "Remind" timer is set, "End" will be displayed as "----".
Cancel a reservation
Change a reservation
D
Prepare for recording before the timer starts
Record
If you use a "T-V LINK" compatible device, set it to the external input mode then to the
standby mode. At the start time, the device will start recording automatically. Make
sure the recording times of other recordings on the recording device do not overlap
with recording times on the TV. Some "T-V LINK" devices may not work correctly. It is
recommended to do a recording test.
"What is "T-V LINK"?"
If you use a "T-V LINK" incompatible device, manually set the device's timer to record
the external input at the same recording times set on the TV. For details, refer to the
device's manual.
The power lamp on the TV will start blinking 3 minutes before the start time (green or
red). Then, it will light during recording (green or orange).
To stop the recording while a "Record" timer is in progress, press "
message "Stop Recording?". Then press the "OK" button.
Remind
Timer
PR
7 : ZDF
(red) Record
When "Maturity Rating" is set to "Unlock"
select
(green)
A select
B display the menu
Set the recording device as follows. At the start time, the programme
will be output from the EXT-2 terminal to the recording device.
INSTRUCTIONS
g
"Technical Information"
The "Remind" timer does not turn the TV on or off. Turn the TV on
before the timer starts. At the start time, the channel will automatically
change.
14:00 05/05/2007
Start
End Date Mode
17 : 15 18 : 00 05/05 /2007 Once
(blue) Remind
A select "Yes"
B cancel reservation
Change the settings
Radio
TV
" to display the
11