AL66
Pulse / modifiable ccTalk COIN ACCEPTOR
Quick Guide
Rev. 2.00
The AL66 coin acceptor can operate by Pulse mode or by modifiable ccTalk protocol.
It is available in the following versions:
V = rejected coin sorted from bottom rear slot, accepted coin sorted from bottom front slot
I = rejected coin sorted from bottom front slot, accepted coin sorted from bottom rear slot
K = rejected coin sorted from slot low front end, dropping slot on top
S = rejected coin sorted from slot low front end, dropping slot at upper front end
Mechanical features
Format
Size
Weight
Electrical features
Supply voltage min.
Supply voltage max.
Power consumption:
in acceptance
in reading
in Stand by
Standard power save
Self-wake up
Output type
Saturation output voltage
Output voltage max.
Output current max.
Input trigger voltage min.
Input voltage max
Input impedance
Coin acceptance
Coin channels number
Coin diametre min.
Coin diametre max.
Coin thickness
Speed
Communication modes
Pulse
Modifiable ccTalk
Timing data
Power-up recovery time
Wake-up recovery time
Pulse or time out tolerance
Ambient conditions
Working ambient temperature
Storage temperature
Humidity
EMC performance
This product is compliant with EN55014-1 and EN55014-2 test specification
> 8-bit top-performing microcontroller with 36 KB Flash-memory, highly immune to magnetic interference and
to environmental conditions.
> Six magnetic sensors and one optic detector combine to guarantee the most accurate capacity of
discrimination. Data-digitizer interface designed to cope at best with bi-metal and magnetized coins. The
system sharpens selectivity and security, and makes the programming process easy and faster.
> One wire-shearer and one wire-tearer in version V provide mechanical shielding against fishing-fraud.
Coin-Guard anti-cheat system, based on the synergy of 3 suitably positioned optic sensors.
Technical specs
3½" standard
88 x 102 x 52 mm
203 g
12 V DC (min. 8 V DC)
24 V DC (max. 26 V DC)
max. 350 mA(30 ms)/100 mA
≤ 30 mA
≤ 25 mA
≤ 5 mA
≤ 6 mA
Open collector Darlington
≤1 V
50 V (Active Low)
250 mA
3 V (Active High)
50 V
≈55 k;
16
16 mm
32 mm
1 to 3,4 mm
3 coins/sec. (V) – 4 coins/sec. (S, K, I)
switching by Dip-Switch or by
programming software
≤ 200 ms
≤ 50 ms
± 2%
0°C to 60°C
- 30°C to 70°C
up to 75% (non condensing) for standard
up to 95% for tropicalized version
QUICK GUIDE AL66 PULSE / CCT MOD, 1 of 4
Need help?
Do you have a question about the AL66 and is the answer not in the manual?
Questions and answers