ProForm DTL15140 User Manual page 20

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Distance/Incline display
will show the total number of
miles (or kilometers) that the
walking belt has moved.
The Time/Pace display will
show the total number of
hours the treadmill has been
used.
An "E" for English miles or
an "M" for metric kilometers
will appear in the Speed dis-
play. Press the Speed
ton to change the unit of
measurement.
IMPORTANT: The Calories/Pulse display should be
blank. If a "d" appears in the display, the console is in
the "demo" mode. This mode is intended to be used
only when a treadmill is displayed in a store. When the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the
buttons on the console will not operate. If a "d" appears
in the Calories/Pulse display when the information
mode is selected, press the Speed
display is blank.
To exit the information mode, remove the key.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse
sensor features hands-
free operation and en-
ables you to use the con-
sole's heart rate pro-
grams. To purchase a
chest pulse sensor, call
toll-free 1-800-734-2377.
but-
button so the
HOW TO LEVEL THE TREADMILL
If the treadmill wheels
are touching the floor or
if the treadmill rocks
slightly, turn one or both
of the leveling feet
under the upright base
until the wheels are off
the floor and the rocking
motion is eliminated.
Note: If necessary, tip
the treadmill and use a
phillips screwdriver to
turn the leveling feet.
CHANGING THE ISOLATOR SPRINGS
The treadmill features Isolator Springs (6) that cushion
the walking platform. A pair of Gray Isolator Springs is
preinstalled on the treadmill. For a firmer walking plat-
form, the Gray Isolator Springs can be removed and
the included pair of Blue Isolator Springs can be in-
stalled.
10
12
Fold the treadmill to the storage position (see page
21). Using an allen wrench, remove the two Isolator
Bracket Bolts (12) from one of the Isolator Brackets
(10). Remove the Gray Isolator Spring (6) from the
Isolator (7) and slide a Blue Isolator Spring onto the
Isolator. Insert the Isolator back into the circular chan-
nel in the Isolator Top Cap (5), and reattach the
Isolator Bracket with the Isolator Bracket Bolts; start
both Isolator Bracket Bolts before tightening either
of them.
Replace the other Gray Isolator Spring (6) in the same
way.
20
Leveling
Feet
Wheel
6
7