Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This bespoke RS-232 Level Shift Board is designed to adjust control commands between PCs and control devices, including TV Wall systems. The PC protocol is converted so that it is readable by the control device to ensure it executes the exact command action. 2.
This LED will illuminate when the device is connected to an active power supply. 6.2 Rear Panel RS232 OUT CDB-5 RS232 LEVEL SHIFT BOARD RS232 OUT Connect to the RS-232 equipped device to be controlled with a D-Sub 9pin female null cable.
7. CONNECTION DIAGRAM RS-232 Equipped PC or Notebook RS-232 USB Power Rear RS232 IN POWER USB 5V Front RS232 OUT CDB-5 RS232 LEVEL SHIFT BOARD RS-232 Screen Screen Screen Screen HDMI OUT HDMI OUT HDMI OUT HDMI OUT DC 5V...
8. SPECIFICATIONS Baud Rate 110 bps~921, 600 bps Input Port D-Sub 9-pin (Female) Output Port D-Sub 9-pin (Male) ESD Protection Human body model: ±8kV (air-gap discharge) ±4kV (contact discharge) Power Supply USB bus power or USB to DC power supply Dimensions 71mm (W)×81.5mm (D)×23 mm(H) Weight...
Page 12
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw MPM-CDB5...
Need help?
Do you have a question about the CDB-5 and is the answer not in the manual?
Questions and answers