Tayosan SRE 3001 Instruction Manual page 27

If recovery is unsuccessful or other error codes not listed below were shown, unplug the Unit once

and then place plug properly again, and press <ON> key.
If recovery is still unsuccessful, contact your local distributor or the nearest customer service

agent.
Recovery Procedures
Press <OFF> key first, then <ON> key.
Press <OFF> key first, then <ON> key.
Remove water from fuel receiver.
Clean air filter.
Remove water from fuel receiver.
Check that the Unit is placed on flat and even ground surface and that its
surrounding is safe.
Wait till the Unit cools down and clean the warm air intake.
Remove blocking object, if any, from the warm air blower (louver).
Remove blocking object, if any.
Plug properly in power outlet.
Press <OFF> key first and then <ON> key, after power resumes.
Ventilate the room, and clean the air intake filter.
Though Combustion Stabilizer is designed for the safety purpose, it is
required to ventilate the room once or twice every hour of operation.
Refill after pressing <OFF> key, and then press <ON> to restart.
Clean fuel tank.
Clean fuel filter.
Drain water from fuel receiver, and clean it.
*Odor-free System will not be activated when flames go out because of false operation.
57
54
52
54
41
52
34
36
52
34
44
53
54