Pairing Your Bluetooth Device(S) With Your Jacket - Motorola 0171970B02 Manual

Audex jacket series
Table of Contents

Advertisement

Pairing Your Bluetooth Device(s) with Your
Jacket
To operate with your Audex system, your Bluetooth devices must be paired with
your jacket. To do this, follow these steps:
1
If your Audex Motorola Jacket is not in Bluetooth discovery mode, do the
following:
a In the main
menu, scroll
to Setup and
press
key.
A
b Scroll to Find
Me and press
key.
A
The jacket is placed
in Bluetooth
discovery mode for
3 minutes.
(indicator light is solid blue).
Using your Bluetooth phone or music device, perform a Bluetooth device
2
discovery (refer to your phone or music device manual for detailed
instructions on accessing Bluetooth and putting it in device discovery mode).
For most Motorola phones, you can find the Bluetooth option under the
Main Menu or Connections menu:
After accessing Bluetooth:
a Select Look for Devices.
The phone lists Bluetooth devices it finds.
b Select Audex.
c
Select OK or Yes to pair your jacket with your phone.
14
6:16 AM
# c
2/3
Ì Setup
6:16 AM
# c
2/7
Ì Find Me
6:16 AM
# c
Ê Discoverable
d Enter the passkey: 0000
e Select OK.
Note: These steps are for most Motorola phones. For other phones, see
your phone's user's guide for instructions on performing a Bluetooth device
discovery.
When your Audex Motorola Jacket successfully pairs with your Bluetooth phone
or music device, the indicator light flashes rapidly in blue with quick purple
flashes for 5 seconds. The Bluetooth Active (
display when paired with your phone, while the Bluetooth Active (
Bluetooth Device Connected (
) icons display when paired with your music
Ç
device.
Listening to Music
Your Audex Motorola Jacket allows you to select from multiple Bluetooth
streaming music sources or an iPod to listen to music.
Note: In some instances, if your Bluetooth phone is paired with the Audex
system to make wireless phone calls, you may have to temporarily disconnect
the phone's handsfree link to establish a wireless music connection with your
Bluetooth music device. Once the wireless music link is established, the Audex
system attempts to automatically reestablish the handsfree link (ensure your
phone has Bluetooth is turned on). When reconnected, the Phone Connected
(
) icon displays to indicate successful handsfree link with your phone. If the
È
icon does not display, pressing the Send key manually re-establishes the
handsfree connection.
Similarly, in instances where the Audex system is supporting both handsfree and
streaming music connections, and the streaming music link is disconnected (e.g.
deleting a music source), then the handsfree connection may also disconnect. If
this occurs, the Audex system automatically re-establishes the handsfree link
with your phone. If this does not occur, press
the handsfree link.
) and Phone Connected (
) icons
a
È
) and
a
key to manually re-establish
C

Advertisement

Table of Contents
loading

Table of Contents