Miele KFN 15943 D edt/cs Operating And Installation Instructions page 83

 Replace the panel  onto the soft-
close mechanism from above, click-
ing it back into place first at the bot-
tom and then at the top.
 Close the upper machine door.
Reattaching the door handles

Risk of damage!
The door seal may be damaged if the
handle is fitted incorrectly.
Please make sure you follow the in-
structions below carefully when you
refit the handle.
 Loosely attach the door handle to the
opposite side with the two front
screws  to start with.
The mounting plate  must be posi-
tioned on the door casing so that when
the door is closed it is flush with the
outer wall of the appliance.
Changing the door hinges
 Firmly tighten all 4 screws .
 From the appliance side, slide the
sidebar  into the guide on the
mounting plate until you hear it click
into place.
Make sure that the sidebar  does
not come into contact with the door
seal when the door is opened. This
would cause permanent damage to
the door seal.
83