Alcatel OneTouch Conquest User Manual page 150

Your Wi-Fi settings changes are saved.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
l
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
l
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu
n
> Advanced > Network notification.
The setting is available when Wi-Fi is turned on.
l
Tap Network notification to turn the option on or off.
l
Scanning always available: From Wi-Fi settings, tap Menu > Advanced > Scanning
n
always available
The setting is available when Wi-Fi is turned on.
l
Tap Scanning always available to turn the option on or off.
l
Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu > Advanced >
n
Keep Wi-Fi on during sleep mode and then select a setting.
Install certificates: From Wi-Fi settings, tap Menu > Advanced > Install certificates and
n
then select a setting.
Wi-Fi Direct: From Wi-Fi settings, tap Menu > Advanced > Wi-Fi Direct to select a setting.
n
WPS Push Button: From Wi-Fi settings, tap Menu > Advanced > WPS Push Button to
n
select a setting.
WPS Pin Entry: From Wi-Fi settings, tap Menu > Advanced > WPS Pin Entry to select a
n
setting.
Check MAC Address: From Wi-Fi settings, tap Menu > Advanced.
n
MAC Address appears below "MAC Address."
l
Check IP Address: From Wi-Fi settings, tap Menu > Advanced.
n
IP Address appears below "IP Address."
l
Settings 143