Wi-Fi Settings - Alcatel OneTouch Conquest User Manual

password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
l
Note: The next time your phone connects to a previously accessed secured wireless network, you
will not be prompted to enter the password again, unless you reset your phone to its factory default
settings or you instruct the phone to forget the network.
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your
phone to connect to a Wi-Fi network. It may be necessary to provide a user name and password for
certain closed wireless networks.
Wi-Fi Settings
Use the Wi-Fi settings menu to manually set your Wi-Fi connection options.
1. From home, tap Apps
2. Tap Wi-Fi.
The Wi-Fi settings menu appears.
3. Tap the Wi-Fi slider to turn Wi-Fi on
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the slider again
l
4. Tap Menu > Advanced.
The advanced Wi-Fi settings menu appears.
5. Configure your Wi-Fi settings.
Your Wi-Fi settings changes are saved.
Disconnect Wi-Fi
You may wish to disconnect from a connected Wi-Fi network without turning Wi-Fi off.
1. From home, tap Apps
2. Tap Wi-Fi.
The Wi-Fi settings menu appears.
3. Tap the name of the connected access point and then tap Forget.
Wi-Fi is disconnected.
After disconnecting from an access point, you may need to re-enter the password to
l
reconnect.
Connectivity
> Settings .
.
.
> Settings .
134