Cleaning The Interior And The Exterior Of The Unit; Cleaning The Ice Bucket; Cleaning The Dispenser - Kenwood KSBSDIX16 Installation And Instruction Manual

cleaning
cleaning the interior and the exterior of the unit
Remove all
the shelves and
drawers.
Wipe the
inside
of the
unit
with
a
weak
solution
of
bicarbonate
soda
and
then
rinse with warm
water
using a sponge
or
cloth.
Wipe
completely
dry before
replacing
the
shelves
and
drawers.
Use a
damp
cloth
to
clean
the
exterior,
and
then
wipe with
a standard
furniture polish.
Make sure
that the doors are
closed
to
avoid
the polish getting on the magnetic door seal or inside the unit.
The grille of the condenser at the back of the unit
and the adjacent
components
can be
vacuumed
using a
soft brush aftachment.
cleaning the ice bucket
lce
may
clump
in
the ice bucket
if
they are not dispensed
for a period of time.
lf
this occurs, remove
all
the
ice
and
clean
the
ice
bucket. lce may
also
not come out
through the dispenser
if
they
get
stuck
in
the chute. lf this occurs, clean
the ice
bucket and
the chute.
Wash the ice
bucket
and
the chute
with a mild detergent, rinse
well and
dry
thoroughly.
Do
not
use
harsh or abrasive cleaners
or
solvents.
.
To remove
the ice
bucket,
lift
it up
then pull out
slowly
.
To
re-install
the ice
bucket:
1.
Make sure
the ice bucket
coupler and motor coupler
are at a suitable
angle
to connect correctly.
lf
not, turn
the ice bucket coupler
to
the
right angle
to match with
the
motor coupler.
coupler
2.
Re-installation is
the
reverse order
of removal'
Make sure the
ice bucket
is held
firmly
by
the bracket'
cleaning the disPenser
Wipethereceivingbaseofthedispenserwithdrytowelregularlytoavoidoverflowing.
13