Advertisement
Advertisement
Table of Contents
Related Manuals for Studiomaster PAX10+
Summary of Contents for Studiomaster PAX10+
- Page 1 PA X+ USER GUIDE...
- Page 2 Applications Read the User Guide Unpacking Trouble Shooting Technical Specification Safety Instructions Warranty Service Information Controls & Features - PAX10+ Controls & Features - PX10+ Glossary of Terms Controls & Features - PAX12+ Controls & Features - PX12+ www.studiomaster.com www.studiomaster.com...
- Page 3 Thank you for buying this Studiomaster product. Remove your Studiomaster product from its packaging The Studiomaster PAX+ and PX+ range are compact, and ensure that along with this User Guide you have an powerful stage monitors designed for the working A.C.
-
Page 4: Safety Instructions
There are no user serviceable parts inside. Information section for details. Do not operate the unit next to heat sources such as radiators. WARNING THIS APPARATUS MUST BE EARTHED (GROUNDED) The unit should not be operated or stored near rain or moisture. www.studiomaster.com www.studiomaster.com... - Page 5 PA X+ Controls & Features - PAX10+ Features - PX10+ LINE input : TRS jack socket suitable for use with This is an extension (unpowered) loudspeaker cabinet for the balanced or un-balanced line level signals as supplied PAX10+. Use a suitable Jack to Jack speaker grade cable to by the outputs of mixing consoles, CD players, connect to the PAX10+.
- Page 6 HI : Similar to the treble control on a HI-FI system can correct level to the internal amplifier. For high signal increase or decrease sounds in the treble range. levels (example : the output of a mixing console) use a Adding a little HI on playback (CD/MP3) can add www.studiomaster.com www.studiomaster.com...
- Page 7 PA X+ brightness to the sound. problems. MID : This is where the PAX12+ tone controls differ NOTCH FILTER and switch : When using stage from those on a HI-FI. As the name suggests it can monitors the biggest problem is getting sufficient increase or decrease sounds in the middle range.
- Page 8 GAIN control slightly or turn down the It is also recommended that the PX12+ only be used with the sound source. PAX12+ although it can be used with other monitor systems and amplifiers provided its power rating is not exceeded. www.studiomaster.com www.studiomaster.com...
- Page 9 Use supplying a clear sound to the drummer. microphones with a cardioid response, such as the Studiomaster KM series, as they tend to be less sensitive to sounds behind the microphone grill (off axis).
-
Page 10: Trouble Shooting
Reduce the volume. The signal source is too high. Reduce at the mixing console or other sound source. Extreme tone control settings can overload the amplifier. Reduce control setting by turning them toward the centre (12 o’clock) position. www.studiomaster.com www.studiomaster.com... -
Page 11: Technical Specification
PA X+ TECHNICAL SPECIFICATION FACTS & FIGURES PAX10+ PAX12+ Speaker 10” custom design, high output Speaker 12” custom design, high output HF Unit High frequency tweeter HF Unit High frequency tweeter Finish Black carpet covering, corner protectors, feet, handle Finish Black carpet covering, corner protectors, feet, scoop handle Power output @ 1% THD 80W @ 8 ohms, 120W @ 4 ohms (with PX10+) Power output @ 1% THD 120W @ 8 ohms, 150W @ 4 ohms (with PX12+) - Page 12 PA X+ WARRANTY ARE YOU COVERED? The Manufacturer warrants all Studiomaster products to be free copy of the original sales receipt is submitted whenever a from defects in materials and workmanship for a period of one warranty service is required.
-
Page 13: Service Information
SERVICE INFORMATION HOW TO GET MY PRODUCT REPAIRED If you have a problem with your Studiomaster product or think it You must have the Returns Authorisation number clearly marked has developed a fault you should first carefully check the Trouble on the outside of the carton or we may refuse the delivery. -
Page 14: Glossary Of Terms
The effect produced when sound is reflected off hard surfaces. Often to the input of a processor and returned to the channel before it is routed to reproduced artificially using electronic equipment (see DELAY). the main mix. Processors connected to insert points tend to be ‘serial’ www.studiomaster.com www.studiomaster.com... - Page 15 Although some use a battery, the majority 6 pin XLRs also exist for specialist applications. draw this power from the mixing console to which they are connected. A switchable +48V supply is provided by Studiomaster consoles which covers EXPECT THE BEST EXPECT THE BEST...
- Page 16 EXPECT THE BEST EXPECT THE BEST Studioking Limited Unit 1 Youngs Industrial Estate, Stanbridge Road, Leighton Buzzard, Bedfordshire LU7 4QB UK Tel : 44 (0)1525 217111 Fax : 44 (0)1525 378466 Email : enquiries@studiomaster.com www.studiomaster.com PAX+M ENG V1...
Need help?
Do you have a question about the PAX10+ and is the answer not in the manual?
Questions and answers