Fisher-Price Slithering Jake Manual

• Please keep these instructions for future reference.
• Requires four "C" (LR14) batteries for the RC snake and one 9 volt (6LR61)
alkaline battery for the remote (not included).
• Adult assembly is required.
• Tool needed for battery installation: Phillips screwdriver (not included).
the RC Snake
®
Model Number 77149

Assembly

• Insert and "snap" the breakaway
tail into the RC snake's body.
• Hint: The RC snake's breakaway tail
may detach from the body during
play. If this happens, simply insert
and "snap" the breakaway tail into
the body.
Body

Battery Tips

• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always
remove exhausted batteries from
the toy. Battery leakage and
corrosion can damage this toy.
Dispose of battery(ies) safely.
• Never short circuit the
battery terminals.
• Non-rechargeable batteries are
not to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the "Battery Installation
instructions are to be used.
• If removable rechargeable
batteries are used, they are
only to be charged under
adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly
for damage to the cord, plug,
enclosure and other parts. Do not
use a damaged battery charger
until it has been properly repaired.
Breakaway Tail
1