Network Specifications - Canon TX-4000 Online Manual

Hide thumbs Also See for TX-4000:

Printing performance

Print method

Maximum resolution

Number of nozzles

Memory and hard disk

Hard disk capacity

Print job storage capacity

You can use both USB and LAN at the same time.

You cannot use wireless LAN and wired LAN at the same time.

Network Specifications

Communication protocol

Main unit and Stand (when basket is used):

Approx. 78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)

Main unit and Stacker:

Approx. 78.5 x 74.4 x 61.5 inches (1993 x 1888 x 1560 mm)

2400 dpi (horizontally) * x 1200 dpi (vertically)

* Prints with a minimum 1/2400 inch dot pitch between ink droplets.

MBK: 5120 nozzles, others: each 2560 nozzles

128 GB (2GB physical memory)

500 GB (encryption)

Personal mail boxes (Permanent storage area): 180 GB

Common Box: 100 jobs

Personal Boxes: 100 jobs

Hi-Speed USB *

* To use Hi-Speed USB, your computer must support Hi-Speed USB. Addition-

ally, the Hi-Speed USB interface is completely backward compatible with USB

1.1, so the printer can be connected even if the computer interface is USB 1.1.

USB flash drive

Wired LAN: IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-TX) /

IEEE802.3 (10BASE-T)

Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *

* A connection can be established by configuring Standard setup, WPS (Wi-Fi

Protected Setup), WCN (Windows Connect Now), Easy wireless connect.

SNMP (Canon-MIB compatible), HTTP, TCP/IP (IPv4/IPv6), FTP

Show Quick Links