Table of Contents
Advertisement
WSR-ANT Parts List:
PVC Pipe
1, 23 1/2" long 1 1/2" diameter PVC pipe
4, 23 1/2" long 1" diameter PVC pipe
1, 2 1/2" long 1" diameter PVC pipe
1, 1 3/4" long 1" diameter PVC pipe
PVC Pipe parts
4, 1" PVC endcaps
1, 1 1/2" PVC endcap
1, 1x1x1x1 PVC 'X' connector
1, 1x1x1 PVC 'T' connector
1, 1 1/2x1 PVC reducer
COAX Cable
1, 27" piece of RG58U 50 ohm coax cable
1, 14 1/8" piece of RG62 75 ohm coax cable
Miscellaneous
4, 21" pieces of stiff buss wire
Mounting hardware for 'F' connector
Optional, not required
WSR-LNA or other preamp that fits within 1 1/2" PVC
Stuff required for assembly
PVC Glue (available at any hardware store)
PVC cleaner or semi fine sandpaper (any hardware)
Thin Rosin Core Solder (Radio Shack #RS64-025)
X-ACTO knife, or razor blade
Needle Nose Pliers (Radio Shack #RS64-1844)
Small diagonal cutters (Radio Shack #RS64-1845)
Soldering iron (Radio Shack #RS64-2072)
Mounting hardware for permanent setup (See text)
Patience
WSR-ANT • 8
Advertisement
Table of Contents
