Samsung X15Plus Getting Started page 107

Q6 In the following cases, the screen blinks or displays noise for a
short time:
(Clicking the nView tab, changing the resolution, changing the display device,
removing the AC adapter, restarting the system, or changing the PowerMizer
level)
A This may happen while the video driver is examining the connected device.
Q7 When I connect a projector, and change the setting to display
screen image on both the LCD and the projector by pressing
<Fn>+<F4 / LCD/CRT> keys, screen is not displayed properly.
A Press <Fn>+<F4 / LCD/CRT> keys once again.
Q8 The desktop momentarily appears as a broken image when
zooming in or out of the Media Player screen when Media
Player is running.
A Since zooming in or out of the Media Player screen changes the screen resolu-
tion, the desktop may momentarily appear as a 'broken image' during this oper-
ation.
Q9 Execution of a DOS command such as DIR causes the desktop to
momentarily appear as a broken image when using the system
in 2-byte character language DOS mode.
A This may happen when you have configured the display in such a way that the
screen is displayed to both the LCD and CRT screens simultaneously. To avoid
this, configure the screen as either LCD or CRT. (See "Using External Display
Devices" (p.6-8).)
Q10 The 'Turn off monitor' function configured in the Power
Management does not work while using the system in full
screen DOS mode.
A The 'Turn off monitor' function may not work in full screen DOS mode. (See
"Using Power Management Options" (p.5-2).)
Chapter 7. Recovering the Computer 7-11