Table of Contents
Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 251012
16
12" Disc Sander
01953
Please read and fully understand the instructions in
this manual before operation. Keep this manual
safe for future reference
1
Advertisement
Table of Contents
Related Manuals for SIP 01953
Summary of Contents for SIP 01953
- Page 1 This will allow the recycling of raw materials and help protect the environment. FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: TEL: 01509500400 01953 EMAIL: sales@sip-group.com or technical@sip-group.com www.sip-group.com...
-
Page 2: Declaration Of Conformity
12” Disc Sander - SIP Pt. No. 01953 Conforms to the requirements of the following directive(s), as indicated. 2006/95/EC Low Voltage Directive 2006/42/EC Machinery Directive 2004/108/EC EMC Directive 2002/95/EC ROHS Directive Signed: …………………………………... Mr P. Ippaso - Director - SIP (Industrial Products) Ltd Date: 21/07/2012. - Page 3 PARTS LIST CONTENTS Ref No. Description SIP Part No. Sanding Pad (12") 06896 Main Casting WD01-00135 Motor WD01-00136 WD01-00137 Brake WD01-00138 Brake Frame WD01-00139 Page No. Description WD01-00140 Contents Handle WD01-00141 General Safety Instructions Spring WD01-00142 Specific Safety Instructions Washer...
- Page 4 Read all these instructions before operating the disc sander and save this user manual for future reference. SIP recommends that this disc sander should not be modified or used for any applica- tion other than that for which it was designed. If you are unsure of its relative applica- tions do not hesitate to contact us and we will be more than happy to advise you.
- Page 5 MAINTENANCE GENERAL SAFETY INSTRUCTIONS….cont Do not leave the machine unattended when in use. Switch the machine off and There is very little mechanical maintenance that can be carried out on the machine. unplug from the mains supply before leaving the work area. Do not allow children or animals near the disc sander, particularly when in use.
- Page 6 Note: Supplementary information. Your SIP 12” Disc Sander is fitted with a safety NVR (No Volt Release) switch. This means that if power is cut to the sander (such as in a power failure); the motor will not start to run once the power is returned without the operator following the above instructions to Operational Safety.
- Page 7 This SIP sander is fitted with a standard 230v ~ 13 amp type plug. Before using the machine, inspect the mains lead and plug to ensure that neither are damaged. If any damage is visible have the machine inspected / repaired by a suitably qualified person.
- Page 8 GETTING TO KNOW YOUR SANDER Guarantee: This SIP disc sander is covered by a 12 month parts and labour warranty covering fail- ure due to manufacturers defects. This does not cover failure due to misuse or operat- ing the sander outside the scope of this manual - any claims deemed to be outside the scope of the warranty may be subject to charges Including, but not limited to parts, labour and carriage costs.
Need help?
Do you have a question about the 01953 and is the answer not in the manual?
Questions and answers