Sound Menu - JVC LT-32DF7BK Instructions Manual

PC PICTURE
Contrast
Brightness
Colour Temp
R
G
B
Reset
H: 37kHz V:75Hz
Contrast, Brightness and Colour Temperature
adjustments in this menu are identical to ad-
justments defined in TV picture menu.
When Colour Temp is Manual, you can also
adjust the R,G,B items. R, G and B adjust the
TV image colour in PC mode. You can change
the TV colour to your desired colour: R (Red),
G (Green), B (Blue)
Select Reset and press "OK" button to reset
the picture modes to factory default settings.

Sound Menu

| }
By pressing / button, select the third icon.
Sound menu appears on the screen.
The items in this menu are described at
Sound menu starting section
Source Menu
| }
By pressing / button, select the fourth icon.
Source menu appears on the screen.
In source menu, highlight a source by press-
€
ing ~ / button and switch to that mode by
| }
pressing / or "OK"button.
Sound in PC mode
• Connect the PC's Audio output to the TV's PC
Audio In socket with an audio cable.
46
30
Normal
32
32
32
800x600
Other Features
TV Status
Programme Number, Programme Name
and Sound Indicator are displayed on the up-
per right side of the screen when a new pro-
gramme is entered,
Mute Indicator
It is placed in the upper left side of the screen
when enabled.
To cancel mute, there are two alternatives; the
first one is pressing the
second one is increasing/decreasing the vol-
ume level.
PIP modes
Press the
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 2
sizes and 4 positions (upper left, upper right,
bottom left and bottom right)(optional) avail-
able for the PIP window. You can use
button to change the PIP position. You can
€
use ~ / buttons to change PIP window
size. Aspect Ratio of the PIP window is fixed
and 4:3.
When PIP Mode is entered, the default active
window is PIP window and the active window
is indicated by a green frame around it. The
active window can be changed by pressing
button. The status info OSD belongs to
active window. The place of the status OSDs
are same for both windows.
By pressing "P+" or "-P" button or directly en-
tering the channel number, you can watch the
channel you want at the active window.
Press the
AV
active window. (Except EXT-3 and EXT-5 in pip)
Press "MENU" button to see the main menu
in PIP mode. Items change due to the case
whether the active window is PIP window or
main window.
- 31 -
button is pressed.
button and the
button to switch to PIP mode .
button to select the source for
| }
/