Feature Menu - JVC LT-32DF7BK Instructions Manual

Treble
€
~
By pressing / button, select Treble. Press
| }
/ buttons to change Treble level.l
Hyper Sound
You can use this feature to switch the sound
effect on or off. If the current sound system is
Mono and the sound effect is switched on,
then the sound will be heard as if it is Stereo.
If the current sound system is Stereo, switch-
ing this effect on will give a more spatial effect.
| }
Pressing / button will turn this feature on
or off.

Feature menu

| }
By pressing / button, select the third icon.
Feature menu appears on the screen.
FEATURE
Sleep Timer
Child Lock
Language
Ext-2 Out
Default Zoom
Blue Back
Sleep Timer
€
By pressing ~ / button, select Sleep Timer. .
The timer can be programmed between Off
and 2 hours in steps of 10 minutes by press-
| }
ing / button. If sleep timer is activated, at
the end of the selected time, the TV automati-
cally goes into stand-by mode.
Child Lock
You can use this feature to prevent children
from turning the TV on or changing prog-
rammes or adjustments etc. without remote
control.
The child lock feature can be set by
to either On or Off. When Off is selected, there
will be no difference in the operation of your
TV. When On is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons, except the
Power on/off button, at the rear side of the TV
will not work. If one of these buttons is pressed,
"Child Lock On" will be displayed on the
screen.
Language
By pressing
By pressing
language.
Ext-2 Out
By pressing
You can set Ext-2 Out to TV, EXT-1, EXT-4,
Monitor or Digital by pressing
When Monitor option is selected, it will auto-
mate EXT-2 options.
Ext-2 Out follows currently selected source.
Off
Note: Audio output also follows EXT-2 out set-
Off
English
ting. If you choose Monitor and input source is
TV
other than TV, EXT-1, EXT-4 or Digital,only Au-
Panoramic
dio output is available.
On
Default Zoom
By pressing
Zoom. You can set Default Zoom to Pan-
oramic, Regular or 14:9 Zoom by pressing
}
/
If there is no WSS or aspect ratio (picture size)
information and zoom mode is selected as
Auto by pressing the "ZOOM" button, then the
zoom mode will automatically change to De-
fault Zoom setting. See also Zoom Modes
section
Blue Back
By pressing
You can change Blue Back to On or Off by
pressing
Install menu
By pressing
Install menu appears on the screen.
- 27 -
€
~
/ button, select Language.
| }
/ button, you can select the
€
~ / button, select Ext-2 Out.
€
~
/ button, select Default
button.
€
~ / button, select Blue back.
| }
/ button.
| }
/ button, select the fourth icon.
| }
/ button
| }
/ button.
|