Sound Menu - JVC LT-32DF7BK Instructions Manual

Sharpness
€
~
By pressing / button, select Sharpness.
}
Press button to increase sharpness. Press
|
button to decrease sharpness. Sharpness
level can be adjusted between 0 and 31.
Colour
€
~
By pressing / button, select Colour. Press
}
button to increase colour. Press
decrease colour. Colour level can be adjusted
between 0 and 99.
Hue
This item is displayed in picture menu when
the TV receives an NTSC signal. By pressing
€
~
/ button, select Hue. Press
increase hue level. Press
hue level. Hue level can be adjusted between
-31 and 31.
Colour Temp
€
~
By pressing / button, select Colour Temp.
| }
Press / button to choose one of these op-
tions: Cool, Normal and Warm.
Noise Reduction
This item is used to reduce the image noise
and improve the picture quality at weak sig-
nals.
€
By pressing ~ /
|
duction. Press /
duction level to Off, Minimum, Medium or
Maximum.
Film Mode
Films are recorded at a different number of
frames per second to normal television prog-
rammes.
€
By pressing ~ /
| }
Press / button to set this feature On or Off.
Turn this feature on when you are watching
films to see the fast motion scenes clearly.
3D Comb
3D Comb is used to improve colour transi-
tions and colour quality of pictures.
€
~
By pressing /
| }
Press / button to set this feature On or Off.
|
button to
}
button to
|
button to decrease
button, select Noise Re-
}
button to set Noise re-
button, select Film Mode.
button, select 3D Comb.
Reset
~
By pressing /
| }
/ or "OK" button to reset the picture modes
to factory default settings.

Sound menu

|
By pressing
icon. Sound menu appears on the screen.
Volume
Bass
Treble
Balance
Sound Mode
Hyper Sound
Volume
By pressing ~
}
Press button to increase volume level. Press
|
button to decrease volume level. Volume level
can be adjusted between 0 and 63.
Balance
By pressing ~
}
Press button to increase balance to the right.
|
Press button to increase balance to the left.
Balance level can be adjusted between -31
and 31.
Sound Mode
~
By pressing /
| }
Press / button to change sound mode.
Sound mode is used to identify sound mode of
the headphone and can be set to mono, stereo,
dual I or dual II according to the transmission.
Bass
By pressing ~
| }
/ buttons to change Bass level.
- 26 -
€
button, select Reset. Press
}
/ button, select the second
SOUND
€
/ button, select Volume.
€
/ button, select Balance.
€
button, select Sound Mode.
€
/ button, select Bass. Press
62
24
10
0
Stereo
On