Network Connection - Homeguard HGWIP-711 Quick Start Manual

Get the App
For the best experience, download the Homeguardcare app for your smartphone by scanning the QR code below or searching for
"Homeguardcare" in the app store.
6
Step 1

Network Connection

Connect the AC adapter to Connect the camera to your router
your camera and plug it in. via WiFi Configuration Guide.
LED status
LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator.
LED Indicator Network status indicator Blue colour Working status indicator Red colour
Blinking quickly WiFi configuration successful Beginning upgrade
Connecting to WiFi by One Key The device works normally
Blinking slowly
Configuration on App but no Internet connection
Keep blue (Network status) 1. WPS configuration: searching for available WPS device
Internet connected
Keep red (Working status) 2. WiFi mode: connecting to WiFi signal
The indicator is off WiFi connection failed Device not operational
Make sure you are within range of the
same Wi-Fi network you'll use for your
camera.
7