Mounting On A Table - LG 27BK750Y Owner's Manual

CAUTION
Illustrations in this document represent typical
y
procedures, so they may look different from the actual
product.
Do not carry the monitor upside down by just holding
y
the stand base. This may cause the monitor to fall off
the stand and could result in personal injury.
When lifting or moving the monitor, do not touch the
y
monitor screen. The force applied to the monitor screen
may cause damage to it.
Do not apply foreign substances (oils, lubricants,
y
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
Applying excessive force when tightening screws
y
may cause damage to the monitor. Damage caused
in this way will not be covered by the product
warranty.
NOTE
You can disassemble the stand in the reverse
y
order of the assembly.

Mounting on a table

1
Lift and tilt the Monitor set into its upright position
on a table.
Leave a 100 mm (minimum) space from the wall for
proper ventilation.
100 mm
100 mm
2
Connect the Power cord to the monitor, then plug
the power cord into the wall outlet.
3
Press the Power button on the front of the monitor
to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or
y
installing the monitor. There is risk of electric
shock.
9
100 mm
100 mm