Detaching The Stand Body - LG 27BK750Y Owner's Manual

14
Using the Kensington security system
The Kensington security system connector is located at
the back of the Monitor set. For more information of
installation and using, refer to the manual supplied with
the Kensington security system.
Connect the Kensington security system cable between
the Monitor set and a table.
NOTE
Use of the Kensington lock is optional. The
y
accessories can be purchased at your local
electronics store.

Detaching the Stand Body

1
Place the monitor's screen face down. To protect the
screen from scratches, cover the surface with a soft
cloth.
2
Remove the stand from the monitor by pressing
the button on the bottom center of the back of the
monitor.
Installing the wall mount plate
This monitor supports the specification of the standard
wall mount plate or compatible device.
1
Place the screen face down. To protect the screen
from scratches, cover the surface with a soft cloth.
2
Detaching the Stand Body.
3
Place the wall mount plate onto the monitor and
align it with the screw holes.
4
Tighten the four screws to fix the plate to the moni-
tor using a screwdriver.
NOTE
The wall mount plate is sold separately.
y
For more information on installation, refer to the
y
wall mount plate's installation guide.
Be careful not to use excessive force when
y
mounting the wall mount plate, as this can
damage the monitor's screen.