Testing The Installed Vesdanet Interface Card - Xtralis VESDAnet Product Manual

VESDAnet Interface Card Product Guide
Testing the Installed VESDAnet Interface
Card
The VESDAnet Interface Card uses LEDs to signify certain conditions.
LED
Power
SYS OK
VN A
VN B
DET
Table 1 - VESDAnet Interface Card LED Indicator key
To test the card:
1. Apply power to the VLF.
2. View green Power LED and flashing SYS OK LED on the card.
3. View amber DET LED lit.
4. View amber LEDs lit corresponding to correct Port A and B connections
to the next device.
Using a VESDAnet tool such as VSC, or LCD Programmer, you can now view
and configure the VLF detector via VESDAnet.
8
Color Status
Green Is lit when power is supplied to the card
Amber Is flashing when the card's processor is running
Amber Is lit when the card is communicating on
VESDAnet Port A
Amber Is lit when the card is communicating on
VESDAnet Port B
Amber Is lit when the card is communicating with the
detector.
Xtralis VESDA
www.xtralis.com
®